Product details
Sony WH-1000XM4 Wireless Noise Cancelling Headphones
Specifications
| Headphone | |
|---|---|
| Earpiece Design | Over-Ear (Circumaural), Closed-Back |
| Earpiece Swivel | Yes |
| Earpiece Connection/Wearing Style | Headband |
| Foldable | Yes |
| Driver Type | Dynamic |
| Number of Drivers | 1, per Earpiece |
| Driver Size | 1.57″ / 40 mm |
| Diaphragm | Aluminum-Coated |
| Magnet Type | Neodymium |
| Voice Coil | Copper-Clad Aluminum Wire |
| Active Noise Cancellation | Yes |
| Controls/Microphone Location | Controls: Earpiece (Side Unspecified) |
| Microphone: Earpiece (Side Unspecified) | |
| Full Remote OS Support | Android, iOS |
| Sensors | Proximity, Touch |
| Performance | |
| Frequency Response (Wired) | 4 Hz to 40 kHz |
| Sensitivity (Passive) | 101 dB at 1 kHz |
| Sensitivity (Active) | 105 dB at 1 kHz |
| Number of Voice Mics | 5 |
| Beamforming Support | No |
| Microphone Type | MEMS |
| Noise Cancelling Microphone | Not Specified by Manufacturer |
| Wireless Connectivity | |
| Bluetooth | 5.0 |
| Supported Audio Codecs | AAC, LDAC, SBC |
| Wireless Range | 30′ / 9.1 m |
| Frequency | Bluetooth: 2.4 GHz (2400 to 2483.5 MHz) |
| Multipoint Support | Yes |
| Maximum Paired Devices | 2 |
| NFC | Yes |
| Encryption | No |
| Wired Connectivity | |
| Audio Connector | 1x 1/8″ / 3.5 mm TRS Male Right-Angled |
| Audio Connector to Earpiece | 1x 1/8″ / 3.5 mm Male |
| Cable Length | 3.94′ / 1.2 m (1/8″ / 3.5 mm) |
| Battery | |
| Runtime (BT+ANC) | 30 Hours |
| Runtime (BT) | 38 Hours |
| Standby Time | 200 Hours |
| Quick Charging Times | 10 Minutes for 5 Hours |
| Recharge Time | 3 Hours |
| DC Input Power | 5 VDC |
| Wireless Charging | No |
| Charging Port | USB-C |
| Charging Cable Length | 7.87″ / 19.99 cm |
Product Highlights
- Advanced noise cancellation : Whether you’re flying long-haul or relaxing in a café, the WH-1000XM4 headphones deliver our advanced noise cancelling performance, keeping out even more high and mid frequency sounds.
- The technology behind the noise cancellation : Dual noise sensor technology, featuring two microphones on each earcup, captures ambient noise and passes the data to the HD Noise Cancelling Processor QN1. Using a new algorithm, the HD Noise Cancelling Processor QN1 then applies noise cancelling processing in real time to a range of acoustic environments. Working together with a new Bluetooth Audio SoC (System on Chip), it senses and adjusts to music and noise signals, as well as acoustic characteristics between the driver unit and ears, at over 700 times per second.
- Optimising noise cancelling : The WH-1000XM4 headphones incorporate two technologies to maximise noise cancelling performance. Unique Atmospheric Pressure Optimising delivers optimal sound at high altitude1 while Personal Noise Cancellation Optimiser analyses unique sonic characteristics caused by head size, glasses, and hair, then tailors sound to you.
- Ambient Sound Control : Adjust ambient sound with the Sony | Headphones Connect app to cancel noise while still allowing through essential sounds, like transport announcements, when you’re listening on the move.
- Sound you can believe in : A built-in analogue amplifier integrated in the HD Noise Cancelling Processor QN1 realises an unmatched signal-to-noise ratio for low distortion and exceptional sound quality for portable devices. Powerful 40mm drivers, with Liquid Crystal Polymer (LCP) diaphragms, make the headphones perfect for handling heavy beats and can reproduce a full range of frequencies up to 40kHz.
HD Noise Cancelling Processor QN1, Bluetooth Audio SoC and a dual noise sensor let you listen without distractions
Personal Noise Cancelling Optimiser and Atmospheric Pressure Optimising
High-quality audio with DSEE Extreme™ and LDAC
Adaptive Sound Control automatically adjusts ambient sound settings to suit your location and behaviour
Wireless freedom with BLUETOOTH® technology
